The main features of micro hdmi cable

High Speed ​​HDMI to micro hdmi cable enables you to use mini usb connector to display / device with a standard HDMI port connector - for sophisticated equipment and next-generation HDMI interface to connect to the existing cost-saving solution for HDMI technology.
3 ft HDMI to Micro usb cable Speed ​​w / Ethernet cable, mini-HDMI connector HDMI interface than the standard 50% smaller,
Compliance with HDMI V1.4 specification, D-type connector,
Full 1080p, 3D, Blu-ray, Ethernet, digital audio transmission,
Mylar foil and braid shield maximum noise suppression,
Rugged, life molded connector to use,
Gold-plated contacts and connector housing, to ensure the highest quality signal.

Hdmi cable uses

Hdmi cable wire is used to transmit high-definition multimedia video signal. hdmi cable can be high-quality transmission of uncompressed HD video and multi-channel audio data, the maximum data transfer speed of 5Gbps. At the same time without the signal before transmission / A or A / D conversion, can guarantee the highest quality audio and video signal transmission. Transmission principle HDMI cable 2HDMI data cable data lines Mini hdmi cable line has a "plug and play" feature, automatically, "negotiation", automatically selects the most appropriate video / audio formats between the signal hdmi cable for ps3 source and the display device. Volume DVI HDMI interface, compared with the smaller, and can simultaneously transmit audio and video signals. DVI cable length can not be more than eight meters, otherwise it will affect the picture quality, but HDMI can transmit as far as 15 meters. As long as an HDMI cable, you can replace up to 13 analog transmission line, a home entertainment system can effectively solve the tangled mess behind the wiring problem.

Advantages of micro hdmi cable

micro hdmi cable 1.3 version: 1, adds support for new lossless compressed digital audio formats Dolby TrueHD and DTS-HD Master Audio?'s. 2, the higher the refresh rate: 1920x1080 resolution in the same pattern, micro hdmi cable 1.3 offers 165Hz refresh rate than the dual channel DVI interface 120Hz refresh rate higher. micro hdmi cable 1.4 version: 1, Ethernet Channel: HDMI Specification 1.4 adds data path in the cable, and to achieve vga to hdmi cable two-way high-speed transmission. This function in the coupling device, the Ethernet cable can be used to speed 100Mb / s transmission and reception of data, and the equipment immediately becoming IP-based devices. HDMI Ethernet Channel will allow an integrated Internet-enabled HDMI devices without the use of additional Ethernet cable, you can share mini HDMI cable its Internet connection with other HDMI devices. This new feature also provides HDMI devices to share content between required interconnection architecture. 2, higher resolution: support 3840 × 2160 24Hz / 25Hz / 30Hz; 4096 × 2160 24Hz resolution. The new specification supports 4096 × 2160 resolution, making the HDMI interface to transmit content at the same resolution as many digital theaters used. The dual-channel DVI interface can support up to 2560x1600 resolution.

Status of wire and cable industry

Wire and cable industry is the second largest industry in China, second only to the automotive industry, product variety to meet the rate and the domestic market share of more than 90%. In the world, China's wire and cable output has surpassed the us to become the world's largest cable producer. With the rapid development of China'swire and cable industry, the growing number of new enterprises, the industry overall technological level has been greatly improved.

China's sustained and rapid economic growth, providing a huge market space forwire and cable products, the Chinese market strong allure, makes the world all eyes focused on the Chinese market, in the reform and opening to the outside world in short decades, huge production capacity of China's cat5e LAN cable industry formed to make the world with admiration. As China's power industry, data communications, urban rail transit industry, automobile industry and shipbuilding industry scale unceasing expansion, the wire and cat5e patch cable demand will grow rapidly, the future electric wire and cable industry has huge development potential. In 2008 November, our country to cope with the world financial crisis, the government decided to invest 4 trillion yuan stimulating domestic demand, which has about 40% for urban and rural power gridconstruction and transformation. National wire and cable industry has a good marketopportunity, around the wire and cable enterprises to seize the opportunity, meet the new round of urban and rural power grid construction and transformation.

Storage method of cable

Cable if stored for a long time, according to the position of the cable, should make the following considerations:

1, under the eaves. Cable only in not exposed to direct sunlight or ultra high temperature, standard LAN cables can be applied, recommend the use of pipeline.

2, external wall. Avoid direct sunlight and man-made damage to the wall.

3, in the pipeline (plastic or metal). As in the pipe, pay attention to thermal damage and metal pipe plastic pipe.

4, application of suspension / overhead cat5e cable . Considering the cable sag and the pressure, to adopt what kind of binding mode, cable is directly illuminated by the sun.

5, directly in the underground cable trench laying, the environment is the control of the minimum range. cat5e ethernet cable  trench installation must be periodically dry or moist degreeexamination.

6, the underground pipeline. In order to facilitate future upgrades, replacement of cables, and surface pressure and the surrounding environment isolation, auxiliarypipe isolation, auxiliary pipeline is a better method. But don't expect the pipeline will always keep dry, it will impact on the cable type selection.

Protection measures of cable

With the rapid development of power cables buried underground engineering, a higher demand on the protection of cables, cable protection sleeve is the use ofpolyethylene PE and high quality steel tube after sand blasting pretreatment, dipcoating, heating and solidifying process produced. It is the protection of wire and cable, a kind of the most commonly used electrical insulating tube. Because it hasgood insulation properties, high chemical stability, no rust, no aging, can adapt to theharsh environment and widely applied.

Use the cable protection sleeve protecting cat6 network cable can achieve the followingadvantages: 1, good corrosion resistance, long service life, can be in moist saline alkali area. 2, flame retardant, good heat resistance, can be used in high temperature of 130 degrees and long term deformation, fire is not burning. 3, high strength, high rigidity. In under the road buried without a protective layer of concrete, can roll fastcable engineering construction schedule. 4, cat5e network cable protection sleeve for pipe or pipehas a certain flexibility, can resist the external stress and foundation settlementcaused by the destruction of the. 5, has good performance of anti interference signals. 6, smooth inner wall, do not scratch the cable. The design adopts a socketconnection, convenient installation and connection. The joints with rubber sealing ringseal can adapt to the thermal expansion and contraction, and to prevent sand entering.

Technological characteristics of cable

(1) process flow and equipment layout of production

Production workshop of equipment must be according to the requirement of products and reasonable process emissions, the half finished product of each stage, orderly transfer. Device configuration to consider differences in the production capacity of the production efficiency of the balance, some devices may be configured to two or more,to make the production line's production capacity to balance. Thus the reasonable selection of equipment combination and production site layout, must to balance considering according to products and production capacity.

(2) the organization of production management

Production organization and management must be reasonable and scientific, strict and meticulous, careful and accurate, the operator must be strict in one's demands,according to the requirement of process execution, any link problems, will affect the process smooth, affecting the quality of products and delivery. Especially in multi core cat6 LAN cable , a line on the basic unit of length or shorter, or quality problems, then the whole cable will be insufficient length, scrap. Conversely, if a unit length is too long, it must be off the waste.

(3) quality management

The mode of production of large length of continuous superposition and combination,so that the production process of any link, instantaneous point problem, affect the whole cable quality will. Quality defects occurred in the inner layer, but not found in time to stop production, so the loss caused by the. Because the wire and cat6 patch cable production is different from the assembled products, can be disassembled and replaced the other; any part or process quality problems of wires and cables, is almost unable to restore and remedy for this cable. After the treatment is very negative, not cut short is degraded, or scrap the whole cable. It can not be opened again.

Wire and cable quality management, must run through the entire production process.Quality management and inspection department to the whole production process of tour inspection, operation self checking, process under the mutual inspection, this isto ensure the product quality, an important guarantee to improve the economic efficiency of enterprises and measures.