2014年10月27日星期一

patch panel concept

patch panel management subsystem is the most important component, is to achieve two vertical lines and horizontal cabling subsystem cross-connect hub. MDF is usually installed in a cabinet or on the wall. By mounting accessories, patch panels can be across the board to meet UTP, STP, coaxial cable, fiber, audio and video needs. Commonly Plug-in terminal block
  used in network engineering has UTP patch panels and fiber optic patch patch. Fiber optic patch panel's role in the management of the cable will be connected subsystems, usually between the main line and the line between the various distribution. MDF industry standard definition: patch panel-- suitable for wiring devices jumper connections. It enables the system to move and change the wiring is more convenient. cross-connect system patch panel-- managed by a convenient form of pairs of connectors. Twisted role in the management of patch panel in the twisted-pair cross-connect subsystems used in each room and the distribution line of the main wiring. Many models UTP patch panels, each vendor has its own product line, and the corresponding cat5e network cable three categories, Category 5, Category 5e, Category 6 and Category 7 cables were different sizes and models, in specific projects , you should refer to the product manual, be configured according to the actual situation. Fiber optic patch panel's role in the management of the cable will be connected subsystems, usually between the main line and the line between the various distribution

2014年10月21日星期二

12 patch panel mechanical properties

1 pull-out force: The coaxial cable connector with anti-cable tensile strength greater than 50N; 2 Mechanical displayport to hdmi cable Durability: coaxial connector plug after 1000, shall comply with the provisions of the line marked 2.3.1.3,2.3.1.7,2.3.1.8,3.4.2,2.4.3 and 6.2, and the contact surface of the plating layer is still not expose the base material; 4 Digital Distribution All parts are made of materials should have anti-corrosion properties, such as corrosion resistance should be done without preservative treatment; their physical and chemical properties must be stable; must be compatible between the various materials; 5 Digital Distribution combustion performance of all non-metallic materials structures mini displayport cable shall conform to GB/T5169.7-1985 A standard test requirements; 6 conductive elastic material should be used bronze, bronze; 7 conductor coaxial connector contacts inside and outside the region, should be plated an intermediate layer (buffer layer), then gold-cobalt alloy plating thickness.

2014年10月14日星期二

24-port patch panel panelcat description:

1, environmental requirements 1.1 Working temperature: 5 ℃ ~ 40 ℃; Relative humidity: not more than 85% (30 ℃ pm); Atmospheric pressure: 70 ~ 106Kpa; storage humidity: -25 ℃ ~ +55 ℃. 2, the electrical performance 2.1 Working speed: 2Mbit / s, 8Mbit / s, 34Mbit / s, 45Mbit / s, 140Mbit / s, 155Mbit / s; 2.2 Characteristic impedance: 75Ω (nominal value); 2.3 coaxial connector contact resistance; outer industrial terminal block conductor is not more than 2.5mΩ, after mechanical durability test its value is not more than 2.5mΩ; inner conductor is not more than 10mΩ, after the mechanical endurance test its value is not more than 10mΩ; 2.4 Insulation resistance: the connector between the outer conductor, insulation resistance between the conductor and the cell sheet metal parts should be greater than 1000MΩ, DC voltage measuring circuit is 500V ± 50V; 2.5 Withstanding 12 port patch panel voltage: the connector between the outer conductor, between the inner conductor and the cell sheet metal parts should be able to withstand a frequency of 50Hz, the effective value of the AC voltage of 1000V role 1min without breakdown, no arc; Crosstalk between 2.6 back line defense degree: not less than 70dB (50kHz ~ 233MHz); 2.7 Insertion Loss: less than 0.3dB (50kHz ~ 233MHz); 2.8 Return loss: not less than 18dB (50kHz ~ 233MHz).