cat6 patch panel management subsystem is the most important component is to achieve vertical lines and two horizontal cabling subsystem cross-connect hub. MDF is usually installed in a cabinet or on the wall, commonly used in network engineering twisted pair patch panels and fiber optic patch panels patch panels.
12 port patch panel
2014年10月21日星期二
12 patch panel mechanical properties
1 pull-out force: The coaxial cable connector with anti-cable tensile strength greater than 50N;
2 Mechanical displayport to hdmi cable Durability: coaxial connector plug after 1000, shall comply with the provisions of the line marked 2.3.1.3,2.3.1.7,2.3.1.8,3.4.2,2.4.3 and 6.2, and the contact surface of the plating layer is still not expose the base material;
4 Digital Distribution All parts are made of materials should have anti-corrosion properties, such as corrosion resistance should be done without preservative treatment; their physical and chemical properties must be stable; must be compatible between the various materials;
5 Digital Distribution combustion performance of all non-metallic materials structures mini displayport cable shall conform to GB/T5169.7-1985 A standard test requirements;
6 conductive elastic material should be used bronze, bronze;
7 conductor coaxial connector contacts inside and outside the region, should be plated an intermediate layer (buffer layer), then gold-cobalt alloy plating thickness.
订阅:
博文评论 (Atom)
没有评论:
发表评论